Australia's Wastewater Disposal and Recycling Solutions

Australian Tanks handles all contracts with the same care, courtesy and commitment to successful outcomes whether the job is right next door or on the other side of the country.

Businesses around Australia have been focusing on keeping their wastewater or Waste Water Management Solutions authority compliant as the importance of reusing and recycling wastewater has grown. Mining, vehicle wash bays, workshops, and service stations all require high-quality Waste Water Management Solutions to improve their productivity and comply with environmental regulations.

The building of pretreatment systems to decrease the amount of water impurities emitted in these businesses is required by water authority standards for Australian Tanks. Many industries are also attempting to ensure that their wash areas are AQIS (Australian Quarantine Inspection Services) compliant, which necessitates the use of a certain set of solutions, such as those outlined below:

Oil water separators use a number of technologies, including as coalescing, VGS, hydro cyclone, induced cyclonic, and below-ground solutions, and are utilised in a variety of applications, including wash bays, mining, and AQIS compliance.

For industries such as mining, industrial processes, carwashes, and vehicle or equipment wash down applications, low-cost water recycling systems that minimise water and trade waste expenses are offered throughout Australia. These usually include the most up-to-date and effective water recycling filtration and separation technologies, as well as features that allow you to monitor your system.

Unroofed wash down bays are ensured to comply with the power by first flush diversion systems. These valves, also known as storm water diversion valves, are designed to clean wash water according to local standards and discharge rainwater to storm water valves once a certain amount of rain falls on the wash pad.

Rainwater harvesting systems, on the other hand, collect and treat Stormwater Detention from roofs and ground surfaces, and then use it for cleaning, irrigation, dust suppression, and other site operations. This provides a cost-effective and low-maintenance alternative to water recycling.

Basements, trailer parks, shopping centres, townhouse and apartment complexes, industrial estates, municipal applications, and rural developments are all good places to put sewerage and storm water pump stations. They're normally pre-wired and pre-plumbed, which makes installation a breeze.

PH control systems compute, control, and regulate pH levels and offer a variety of measurement and production possibilities. They're normally delivered as pre-plumbed solutions in an IP65 enclosure system that's simple to incorporate into your current infrastructure.

Mining workshops and other heavy industrial applications employ belt oil skimmers and floating oil skimmers to remove floating oil and debris from water. These oil skimmers save money on onsite detention and output adjustments, and they're usually simple to set up with little ongoing maintenance.

Hydrocarbon treatment systems are required for the difficult treatment of oily water mixes in many places, including mine workshops and washing down bays, power stations, and transformer bunds. The expense of eliminating oily water is high, but it can be reduced by removing hydrocarbons from waste water before releasing it into the atmosphere.

Wastewater treatment and reuse reduces the need for high-quality water while also saving significant amounts of energy and money.


Australian Tank

1 Blog posts

Comments